SNAX/HLS Configuration and Control Manual

Command Dictionary
Using the HLSCOM Utility
6–52 104705 Tandem Computers Incorporated
Chdx_Rsp_R
This FSM controls the passing of negative responses to the send receive FSM (see
Send/Rcv above). Despite the “Received” label, it belongs to the send portion of
the session. This FSM passes responses only at end-of-chain. The field displays
one of the following states:
not_in_use
The FSM is not initialized or is not used in this session.
reset
No user message (SNA chain) is being sent.
inc
A user message (SNA chain) is being sent.
neg_seen
A negative response to the current chain has been received, and the Send/Rcv
FSM is being called to record the fact.
Chdx_Rsp_S
Controls the passing of negative responses to the Send Receive FSM (see
Send/Rcv above). Despite the “Sent” label, it belongs to the receive portion of the
session. This FSM passes responses only at end-of-chain. The field displays one of
the following states:
not_in_use
The FSM is not initialized or is not used in this session.
reset
No user message (SNA chain) is being received.
inc
A user message (SNA chain) is being received.
neg_seen
A negative response to the current chain has been sent, and the Send/Rcv
FSM is being called to record the fact.