SNAX/HLS Configuration and Control Manual

Command Dictionary
Using the HLSCOM Utility
6–54 104705 Tandem Computers Incorporated
QEC_Send
Tracks the state of the quiesce protocol manager for inbound messages. Quiesce
protocol allows either session partner to stop the flow of messages from the other
session partner. This field can display one of the following states:
not_in_use
The FSM is not initialized or is not used in this session.
reset
A quiesce protocol exchange is not in progress.
p_qc
The quiesce protocol exchange is in progress; the QEC RU has been sent, and
the QC RU is expected.
quiesced
The session partner is quiesced—no messages from the session partner can be
received. Messages from the SNAX/HLS application can be sent.
QEC_Recv
This FSM tracks the state of the quiesce protocol manager for outbound messages.
Quiesce protocol allows either session partner to stop the flow of messages from
the other session partner. Reception of a quiesce is shown by this FSM. The
following values is displayed in this field:
not_in_use
The FSM is not initialized or is not used in this session.
reset
The quiesce protocol exchange is not in progress.
p_qc
The quiesce protocol exchange is in progress; the QEC RU has been received
and the QC must be sent. The SNAX/HLS application cannot begin any new
messages.
quiesced
The SNAX/HLS application is quiesced—no messages from the SNAX/HLS
application can be sent. Messages from the session partner can be received,
however, and such messages are placed on the SNAX/HLS application’s
receive queue.