SNAX/HLS Configuration and Control Manual

HLSRDT Error Messages
C–2 104705 Tandem Computers Incorporated
Hex string too long
Cause. The hexadecimal string you entered is too long.
Effect. The command fails.
Recovery. Correct the hexadecimal string and reissue the command.
Invalid character in hex string
Cause. You entered an invalid digit in a hexadecimal string. The valid digits are 0
through 9 and A through F (the letters can be in uppercase or lowercase).
Effect. The command fails.
Recovery. Correct the hexadecimal string and reissue the command.
No profiles defined
Cause. You have not defined any PROFILEs in the HLSRDT session.
Effect. The HLSRDT program does not create a new RDT file, because the result
would be empty.
Recovery. None. If the session should have created an RDT file, run the HLSRDT
program again, making sure you add the PROFILEs you need.
String too long
Cause. The string input on the command exceeds the length limits.
Effect. The command fails.
Recovery. Check the command and reissue.
The object has no name
Cause. No name was assigned to the object.
Effect. The command fails.
Recovery. Check the command and reissue.