SNAX/XF and SNAX/APN Configuration and Management Manual
SNAX/APN Dependent LU Support (XLF and ELF)
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
7-8
Configuring for PLU Accept Using XLF
Notes. Figure 7-4 shows the name and value correspondences across products.
SNAX/APN configuration. Add the following SCF objects:
1. Local LU object for each TLOGMGR with the following attributes:
TYPE
SNANAME
PROTOCOL LOGON
CREATOR (if SNAX Creator-2 is used)
DLUNAME (if a remote LU object is defined for the ILOGMGR LU)
PLUNAME #ZNT21 (the only value allowed).
2. Remote PU object to represent the adjacent type 2.1 node.
3. Remote LU object for each ILOGMGR (optional). SNAX/APN will add a remote LU object
for the ILOGMGR when none exists. Explicit configuration has the benefit that SNAX/APN
can send a BIND to the ILOGMGR to establish or re-establish communication.
4. Remote LU objects for session partners (optional). If the TLOGMGR is configured to use
SNAX Creator-2, the TLOGMGR creates a remote LU object when a logon request is
received; otherwise a remote LU object must be configured.
5. APPL object for each SNAX Creator-2 connection.
SNAX Creator-2 configuration.
1. Start the SNAX Creator-2 process; for example:
RUN CREOBJ /OUT $S.#SPOOL, CPU 1, NAME $CREA, NOWAIT/ 2 &
, CONFIG $DATA.SXCRE.CONDATA
2. Add the following SCF objects:
SU object (for each SNAX Creator-2 connection to SNAX/APN)
APPL object (for each NonStop application to be launched)
For more information, see the SNAX Creator-2 Configuration and Control Manual.
ILOGMGR control file. Add the following entries:
ILOGMGR entry
TLOGMGR entry (for each TLOGMGR to be accessed)
TDMAPPLS entry or entries (listing each NonStop application to be accessed)
For more information, see the Tandem Logon Manager for IBM Systems (ILOGMGR) Manual.
VTAM list. Add the following entries:
APPL entry (for the ILOGMGR)
APPL entry (for each application on the NonStop system)
Users would logon to applications on the NonStop system by typing LOGON APPLID(APL1)
and so on. For more information, see the IBM VTAM Resource Definition Reference.
NCP definition (not shown): Add an LU statement for each SNAX/APN TLOGMGR