SNAX/XF and SNAX/APN Configuration and Management Manual

SNAX/APN Dependent LU Support (XLF and ELF)
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
7-13
Template LUs
Notes.
SNAX Creator-2 configuration.
1. Start the SNAX Creator-2 process; for example:
RUN CREOBJ /OUT $S.#SPOOL, CPU 1, NAME $CREA, NOWAIT/ 2 &
, CONFIG $DATA.SXCRE.CONDATA
2. Add the following SCF objects:
An SU object (for each SNAX Creator-2 connection to SNAX/APN)
An APPL object (for each NonStop application to be launched — only one is defined for
this example)
For more information, see the SNAX Creator-2 Configuration and Control Manual.
SNAX/APN End Node configuration. Add the following SCF objects:
1. The SNAX/APN line
2. A remote PU object to represent the adjacent type 2.1 node.
3. Template LU objects for each and every CRT and ITI application that will be logged onto
by dependent SLUs in the IBM network (only one is defined for this example).
4. APPL object for each SNAX Creator-2 connection.