SNAX/XF and SNAX/APN Configuration and Management Manual

Expand over SNAX/APN Lines
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
8-4
Configuring the SNA Network
LU name in NCP major node defining
system \B
Local LU SNANAME on system \B
CDRSC name in VTAM CDRSC major node
defining system \A
Remote LU SNANAME on system \B
RUSIZES values in default LOGMODE entry
for secondary LU
Must be greater than or equal to SNAX/APN
BIND bytes 10 and 11 (RUSIZES values).
For PROTOCOL NAM, default is %H8989,
meaning maximum RU sizes of 4096 when
receiving and sending.
Table 8-1. Correspondences Between SNA Subarea Network and
SNAX/APN (page 2 of 2)
SNA Network Value SNAX/APN Value