SNAX/XF and SNAX/APN Configuration and Management Manual

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
12-1
12
Objects for SNAX/XF and SNAX/APN
This section describes the types of SNAX/XF and SNAX/APN objects, outlines their
hierarchical relationships to each other, and provides a detailed description of each
object type and object state.
Hierarchy of Object Types
Figure 12-1 shows the SNAX/XF object types supported by SCF and their hierarchical
relationships. The individual object types and their positions in the hierarchy are
described in the following subsections.
Figure 12-2
on page 12-2 shows the SNAX/APN object types supported by SCF and
their hierarchical relationships. The individual object types and their positions in the
hierarchy are described in the following subsections.
Figure 12-1. SNAX/XF Object Hierarchy
Note. Line-handler process (PROCESS) objects do not appear in SCF displays as part of the
object hierarchy. The PROCESS object type is provided for special purposes only, as
described later in this section.
SUBSYS
LINE
PU
LU
SESSION
APPL
LINE
Switched
Floating PU
Switched
Floating LU
VST1201.vsd