APN Configuration and Management Manual

Objects for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

12-2

Object Types and Object Names

The individual SNAX/XF and SNAX/APN object types (APPL, LINE, LU, PROCESS,

PU, SESSION, and SUBSYS) are described in the following subsections. These

descriptions tell how each object is defined for SNAX/XF and SNAX/APN, and give the

naming conventions and applicable object states.

The Null Object Type

In SNAX/XF and SNAX/APN, the null object type is supported only for the VERSION

command; it has no relationship to any of the other supported object types.

The null object type is not a true object type, but indicates that the command can be

issued without specifying an object type. For more information about the null object

type, see the SCF Reference Manual for G-series RVUs.

Figure 12-2. SNAX/APN Object Hierarchy

Note. Line-handler process (PROCESS) objects do not appear in SCF displays as part of the

object hierarchy. The PROCESS object type is provided for special purposes only, as

described later in this section.

SUBSYS

Local PU

(#ZNT21)

Local LU

SESSION

Remote PU

Remote LU

SESSION

LINE

APPL

VST1202.vsd