APN Configuration and Management Manual

Objects for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

12-11

States for APPL Objects

APPL objects have a different set of states than do other types of SNAX/XF and

SNAX/APN objects. The following paragraphs define the states that apply to APPL

objects.

CONNECTED

For SNAX/XF, an APPL object is in the CONNECTED state if an application has

successfully established a connection to it, including password verification if necessary.

In the SNAX/APN environment, an APPL object is in the CONNECTED state if the

SNAX Creator-2 application has successfully established a connection to it.

INACTIVE

An APPL object is in the INACTIVE state if it has been successfully added with the

ADD command but has not yet been opened.

OPENED

An APPL object is in the OPENED state if an application has successfully opened it.

States for Other Types of Objects

Table 12-1 on page 12-12 shows which of these states can apply to each type of

object. For PUs and LUs, the set of applicable states depends on whether the object is

local or remote. SESSION and PROCESS objects have only one possible state:

STARTED.