SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-13
ADD LINE Command
All ADD LINE attributes and their values are described in Section 14, Attributes for
SNAX/XF and SNAX/APN
[ AUTOACCEPT { ON | OFF } ]
[ AUTOLOAD { ON | OFF } ]
[ AUTOTESTRESP { ON | OFF } ]
[ BINDENTRY "bind-table-entry-name" ]
[ BINDTABLE bind-table-name ]
[ CHARACTERSET { ASCII | EBCDIC | KATAKANA } ]
[ DIALTYPE IN ]
[ DSRTIMEMOUT integer ]
[ DUPLEX { HALF | FULL } ]
[ FCSERRREPORTFREQ integer ]
[ FLAGFILL { ON | OFF } ]
[ INTERFACE { RS232 | RS422 | V25 | X21 } ]
[ IOPAGES integer ]
[ L2OPTION1 { ON | OFF } ]
[ LINKSTATIONMODE NRM ]
[ MAXLUS integer ]
[ MAXPUS integer ]
[ MAXRCVSIZE integer ]
[ MDMLOSSFATAL { ON | OFF } ]
[ MDMLOSSFATALTIMER time ]
[ NETID { DATEXL | NONETID | NPDN } ]
[ POLLINT time ]
[ PROGRAM filename ]
[ PUIDBLK integer ]
[ PUIDNUM integer ]
[ RECSIZE integer ]
[ RETRIES integer ]
[ RNRRECEIVE { ON | OFF } ]
[ RNRSEND { ON | OFF } ]
[ RNRTIMER time ]
[ SNRMIFDM { ON | OFF } ]
[ SPEED number ]
[ STATION { PRIMARY | SECONDARY | NEGOTIABLE } ]
[ SUPFCSERRMSG { ON | OFF } ]
[ SWITCHED { ON | OFF } ]
[ SWOPMSG { ON | OFF } ]
[ TIMEOUT time ]
[ TWS { ON | OFF } ]
[ WINDOW integer ]
[ XMTTIMEOUT time ]
[ XPAGES integer ]