SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-18
ADD LU Command
Local LU Object—APPC
Local LU objects used for APPC represent local LUs on the NonStop system.
SNAX/APC open these local LUs. At least one local LU must always be configured.
When APPC is used, the attribute-spec for the local LU object type in the ADD
command is one of the following attribute name and value combinations:
Remote LU Object—APPC
Remote LU objects used for APPC represent LUs in the adjacent node or elsewhere in
a network. Remote LUs must be configured when local LUs are to initiate sessions.
When APPC is used, the attribute-spec for the remote LU object type in the ADD
command is one of the following attribute name and value combinations:
Local LU Object—XLF TLOGMGR LU
attribute-spec for the TLOGMGR local LU object type in the ADD command is
one of the following attribute name and value combinations:
SNANAME snaname
TYPE ( 14, 21 )
[ PROTOCOL SNALUXS ]
[ PUNAME #ZNT21 ]
[ REGISTER { NO | YES | CDS } ]
[ TPF { LOW | MED | HI } ]
PUNAME #pu-name
SNANAME snaname
TYPE ( 14, 21 )
[ SNANETID snanetid ]
[ TPF { LOW | MED | HI } ]
CREATOR #subdevice-name
PROTOCOL LOGON
SNANAME snaname
TYPE ( 14, 21 )
[ APPLFILE $volume.subvol.filename ]
[ CDI { ENHANCED | NORMAL | SPECIAL } ]
[ CHARACTERSET { ASCII | EBCDIC | KATAKANA } ]
[ DLUNAME { #dluname | ( #dluname |, #dluname1 |, #dluname2 ]
[ |, #dluname3 ) } ]
[ MAXREADCNT integer ]
[ PUNAME #ZNT21 ]
[ RSPTYPE { DR | ER } ]
[ RSPTYPEWR {WRER | WRDR } ]
[ SCREEN { NOSCROLL | SCROLL } ]
[ TPF { LOW | MED | HI } ]