SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-19
ADD LU Command
Remote LU Object—XLF ILOGMGR LU
attribute-spec for the ILOGMGR remote LU object type in the ADD command is
one of the following attribute name and value combinations:
Remote LU Object—XLF Acquired LU
The XLF acquired remote LU object represents 3270 terminals and printers that
applications on the NonStop system are to acquire.
attribute-spec for this object type in the ADD command is one of the attribute
name and value combinations listed below:
PUNAME #pu-name
SNANAME snaname
TYPE ( 14, 21 )
[ SNANETID snanetid ]
[ TPF { LOW | MED | HI } ]
DEVTYPE { "IBM-devtype-IBM-model" }
{ IBM-devtype [ -IBM-model ] }
LOCALSNANAME snaname
PROTOCOL { CRT | ITI | SNALU }
PUNAME #pu-name
SNANAME snaname
TYPE ( 14, 0 | 1 | 2 | 3 | 4 | 21 )
[ BINDENTRY "bind-table-entry-name" ]
[ BINDTABLE bind-table-name ]
[ CDI { ENHANCED | NORMAL | SPECIAL } ]
[ CHARACTERSET { ASCII | EBCDIC | KATAKANA } ]
[ MAXREADCNT integer ]
[ NONSNACA { NO | YES } ]
[ QUEUE { NO | YES } ]
[ RECSIZE integer ]
[ RSPTYPE { DR | ER } ]
[ RSPTYPEWR {WRER | WRDR } ]
[ SCREEN { NOSCROLL | SCROLL } ]
[ SNANETID snanetid ]
[ TLOGMGR #tlog-name ]
[ TPF { LOW | MED | HI } ]