SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-26
ALLOWOPENS Command
Consideration
The only types of LUs for which the ALLOWOPENS command is valid are local LUs
used for APPC and acquired remote LUs. If the ALLOWOPENS command is issued for
a remote LU used for APPC, a TLOGMGR LU, or an ILOGMGR LU, SCF rejects the
command.
Therefore, an ALLOWOPENS SUBSYS, SUB LU or ALLOWOPENS LINE, SUB LU
command fails unless only local LUs used for APPC and acquired remote LUs are
defined under the specified SUBSYS or LINE object.
Examples for SNAX/XF
->ALLOWOPENS LINE $SNAP1,SUB LU
->ALLOWOPENS LU $SNAP1.#LU1
->ALLOWOPENS LU $SSCP.#LU2
->ALLOWOPENS PU $SNAP1.#PU1,SUB LU
->ALLOWOPENS SUBSYS $SSCP,SUB LU
Examples for SNAX/APN
->ALLOWOPENS LINE $APN1,SUB LU
->ALLOWOPENS LU $APN1.#LU1
->ALLOWOPENS PU $APN1.#ZNT21,SUB LU
->ALLOWOPENS SUBSYS $SSCP,SUB LU