SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-28
ALTER APPL Command

The PASSWORD attribute can be specified only in the ADD APPL command; it
cannot be specified in the ALTER command. To change the password, you must
use the DELETE command to delete the APPL object, and then use the ADD
command to add it again. The password is not displayed by the INFO APPL
command.

APPL objects apply to SNAX/APN only when the extended logon facility (XLF) is
used.

No APPLTYPE attribute value other than LUNSCRE or 6 is meaningful in a
SNAX/APN environment.
Example
->ALTER APPL $SSCP.#APPL1,APPLTYPE 3