SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-31
ALTER LINE Command
ALTER LINE Attributes (58,3)
attribute-spec for the LINE object type/subtype 58,3 (X.25 line) in the ALTER
command is one of the following attribute name and value combinations:
All ALTER LINE attributes and their values are described in Section 14, Attributes for
SNAX/XF and SNAX/APN.
[ APPLID [ ( ] IBM-appl-name
[ , IBM-appl-name , ... ] [ ) ] ]
[ ASSOCIATESUBDEV device-name ]
[ AUTOACCEPT { ON | OFF } ]
[ AUTOLOGON "ess-table-entry-name" ]
[ BINDENTRY "bind-table-entry-name" ]
[ BINDTABLE bind-table-name ]
[ CHARACTERSET { ASCII | EBCDIC | KATAKANA } ]
[ CONNECTAPPL { cmapplname | NONE | ANY } ]
[ DIALTYPE { IN | INOUT | OUT } ]
[ ESSTABLE ess-table-name ]
[ FCSERRREPORTFREQ integer ]
[ IOPAGES integer ]
[ LUOPMSG { ON | OFF } ]
[ MAXLOCALLUS integer ]
[ MAXLUS integer ]
[ MAXPUS integer ]
[ MAXRCVSIZE integer ]
[ NOACQ { ON | OFF } ]
[ PUIDBLK integer ]
[ PUIDNUM integer ]
[ RECSIZE integer ]
[ SWITCHED { ON | OFF } ]
[ SWOPMSG { ON | OFF } ]
[ SWSESSTIMEOUT hh:mm:ss.tt ]
[ XPAGES integer ]