SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-32
ALTER LINE Command
ALTER LINE Attributes (58,4 and 58,6))
attribute-spec for the LINE object type/subtype 58,4 (Token-Ring line) and 58,6
(Ethernet line) in the ALTER command is one of the following attribute name and value
combinations:
All ALTER LINE attributes and their values are described in Section 14, Attributes for
SNAX/XF and SNAX/APN.
ALTER LINE Attributes (58,5)
attribute-spec for the LINE object type/subtype 58,5 (SDLC line) in the ALTER
command is one of the following attribute name and value combinations:
[ ADDRESS integer ]
[ APPLID [ ( ] IBM-appl-name
[ , IBM-appl-name , ... ] [ ) ] ]
[ AUTOLOGON "ess-table-entry-name" ]
[ BINDENTRY "bind-table-entry-name" ]
[ BINDTABLE bind-table-name ]
[ CHARACTERSET { ASCII | EBCDIC | KATAKANA } ]
[ CONNECTAPPL { cmapplname | NONE | ANY } ]
[ DIALTYPE { IN | INOUT | OUT } ]
[ ESSTABLE ess-table-name ]
[ IOPAGES integer ]
[ LUOPMSG { ON | OFF } ]
[ MAXLOCALLUS integer ]
[ MAXLUS integer ]
[ MAXPUS integer ]
[ NOACQ { ON | OFF } ]
[ PUIDBLK integer ]
[ PUIDNUM integer ]
[ RECSIZE integer ]
[ SWITCHED { ON | OFF } ]
[ SWOPMSG { ON | OFF } ]
[ SWSESSTIMEOUT hh:mm:ss.tt ]
[ XPAGES integer ]