SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-36
ALTER LU Command
Remote LU Object—XLF ILOGMGR LU
attribute-spec for the ILOGMGR remote LU object type in the ALTER command is
one of the following attribute name and value combinations:
Remote LU Object—XLF Acquired LU
The XLF acquired remote LU object represents 3270 terminals and printers that
applications on the NonStop node will acquire.
attribute-spec for this object type in the ALTER command is one of the following
attribute name and value combinations:
[ SNANAME snaname ]
[ SNANETID snanetid ]
[ TPF { LOW | MED | HI } ]
[ BINDENTRY "bind-table-entry-name" ]
[ BINDTABLE bind-table-name ]
[ CDI { ENHANCED | NORMAL | SPECIAL } ]
[ CHARACTERSET { ASCII | EBCDIC | KATAKANA } ]
[ DEVTYPE { "IBM-devtype-IBM-model" }
{ IBM-devtype [ -IBM-model ] } ]
[ LOCALSNANAME snaname ]
[ MAXREADCNT integer ]
[ NONSNACA { NO | YES } ]
[ PROTOCOL { CRT | ITI | SNALU } ]
[ QUEUE { NO | YES } ]
[ RECSIZE integer ]
[ RSPTYPE { DR | ER } ]
[ RSPTYPEWR {WRER | WRDR } ]
[ SCREEN { NOSCROLL| SCROLL } ]
[ SNANAME snaname ]
[ SNANETID snanetid ]
[ TPF { LOW | MED | HI } ]