SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-43
DELETE Command
Valid states for APPL objects are INACTIVE, OPENED, and CONNECTED. Valid
states for other types of objects are ABORTING, DEFINED, DIAGNOSING,
STARTED, STARTING, STOPPED, STOPPING, SUSPENDED, SUSPENDING,
and UNKNOWN. The object states are described in Section 12, Objects for
SNAX/XF and SNAX/APN.
Considerations

The DELETE command is invalid for the local PU object type.

An object must be in the STOPPED state before it can be deleted.
Examples for SNAX/XF
->DELETE APPL $SSCP.#APPL1
->DELETE LINE $SNAP2
->DELETE LINE $SNAP3,SUB LU
->DELETE LINE $SNAP4,SUB ALL
->DELETE LINE $SNAP5,SUB ONLY
->DELETE LINE ($SNAP6,$SNAP7),SUB PU
->DELETE LU $SNAP1.#LU1
->DELETE PU $SNAP1.#PU1
->DELETE PU $SNAS1.#PU2,SUB ALL
->DELETE PU $SNAS1.#PU3,SUB ONLY
->DELETE SUBSYS $SSCP,SUB ALL
Examples for SNAX/APN
->DELETE APPL $SSCP.#CREATE
->DELETE LINE $APN2
->DELETE LINE $APN3,SUB LU
->DELETE LINE $APN4,SUB ALL
->DELETE LINE $APN5,SUB ONLY
->DELETE LINE ($APN6,$APN7),SUB PU
->DELETE LU $APN1.#LU1
->DELETE PU $APN1.#PU1
->DELETE PU $APN1.#PU2,SUB ALL
->DELETE PU $APN1.#PU3,SUB ONLY
->DELETE SUBSYS $SSCP,SUB ALL