SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-45
INFO Command
SEL [ NOT ] state
directs the command to provide information only about objects in the specified
state (if NOT is omitted) or only about objects not in the specified state (if NOT is
specified).
Valid states for APPL objects are INACTIVE, OPENED, and CONNECTED. Valid
states for other types of objects are ABORTING, DEFINED, DIAGNOSING,
STARTED, STARTING, STOPPED, STOPPING, SUSPENDED, SUSPENDING,
and UNKNOWN. The object states are described in Section 12, Objects for
SNAX/XF and SNAX/APN.
[, attribute-name ]...
causes the values of only the specified attributes to be displayed. The attribute
names that you can specify are listed in Table 13-2. If you do not specify any
attribute names, the display shows the values of all attributes for the object.
Table 13-2. INFO Command Attribute Names (page1of3)
Object Type Attributes Attributes (continued)
APPL APPLFILE CREATOR
APPLTYPE
LINE APPLID RECSIZE
ASSOCIATESUBDEV RETRIES
AUTOACCEPT RNRRECEIVE
AUTOLOAD RNRSEND
AUTOLOGON RNRTIMER
AUTOTESTRESP SERVICEMANAGER * (INFO only both)
BINDENTRY SNRMIFDM
BINDTABLE SUPFCSERRMSG
CHARACTERSET SMDMLOSSFATAL * (INFO only)
CONNECTAPPL SPEED
DIALTYPE SPXID
DSRTIMEOUT STATION
DUPLEX SWITCHED
ESSTABLE SWOPMSG
FCSERRREPORTFREQ SWSESSTIMEOUT
FLAGFILL TIMEOUT
INTERFACE TWS
IOPAGES TYPE *
L2OPTION1 VERSION *