SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-54
INFO Command
ON
set if the SCF DEVICE modifier MODEMLOSSFATAL is specified. If ON, this
modifier has no meaning for an Ethernet line.
Type
shows the line type and subtype (58,4).
Version
is the version of the line-handler process. If a mismatch occurs between the line-
handler process and the service manager either in the SPR or RVU versions or
when using multiple service managers, an error message is returned. For more
information, see Appendix C, Error Messages.
The BPoolPages display field for the INFO LINE, DETAIL command does not apply to
SNAX/XF. When SNAX/XF PUs share a line with SNAX/APN PUs, this field contains a
value significant to SNAX/APN operation.
The Applid, AutoLogon, EssTable, LuOpmsg, and NoAcq fields do not apply to
SNAX/APN. When SNAX/APN type 2.1 PUs share the line with SNAX/XF type 2.0
PUs, these fields can contain attribute values significant to SNAX/XF operation.
The AutoAccept, ConnectAppl, DialType, Switched, and SwOpmsg fields have no
meaning when SNAX/APN runs on a Token-Ring line.
All other INFO LINE, DETAIL display fields for line type 58,4 are described in
Section 14, Attributes for SNAX/XF and SNAX/APN.
Detailed INFO LINE Example (58,5)
The following example illustrates the INFO LINE command with the DETAIL option for
a line type and subtype of 58,5 and its returned display.
Command Example:
->INFO LINE $AMAP1, DETAIL