SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-56
INFO Command
manager, (b) the INFO LINE command is sent to the wrong service manager, or (c)
an attempt is made to add a line to a second service manager if that same line was
already added to one service manager.
SMdmLossFatal
displays the value of the SCF DEVICE modifier (NO)MODEMLOSSFATAL.
OFF
the default value, set if the SCF DEVICE modifier NOMODEMLOSSFATAL is
specified.
ON
set if the SCF DEVICE modifier MODEMLOSSFATAL is specified. If ON, the
line handler brings the switched line down in case of modem failure.
Type
shows the line type and subtype.
Version
is the version of the line-handler process. If a mismatch occurs between the line-
handler process and the service manager either in the SPR or RVU versions or
when using multiple service managers, an error message is returned. For more
information, see Appendix C, Error Messages.
The BPoolPages, MaxLocalLUs, MaxRcvSize, PuidBlk, and PuidNum display fields for
the INFO LINE, DETAIL command do not apply to SNAX/XF. When SNAX/XF PUs
share a line with SNAX/APN PUs, these fields contain values significant to SNAX/APN
operation.