APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

13-59

INFO Command

INFO LU Example

The following example illustrates the INFO LU command without the DETAIL option,

and its returned display.

Command Example:

->INFO LU $APN1.#LLU1

Returned Display:

Display Descriptions:

indicates the name of the LU object being reported.

Address (for SNAX/APN only)

is the LU address. For local LUs and for acquired remote LUs, the address is

internally assigned by SNAX/APN. For other remote LUs, the value is zero.

All other INFO LU display fields are described in Section 14, Attributes for SNAX/XF

and SNAX/APN. CharSet corresponds to the CHARACTERSET attribute described in

Section 14, Attributes for SNAX/XF and SNAX/APN.

INFO LU DETAIL Examples

Examples for the use of the DETAIL option of the INFO LU command are shown on the

following pages.

Examples For SNAX/XF

The following example illustrates the INFO LU command with the DETAIL option, and

its returned display.

Command Example:

->INFO LU $SNA1.#LUSCF1, DETAIL

LU *Address PuName *Charset *Type *Protocol *Snaname

\SNACOM1.$APN1.#LLU1 2 #PU1 ASCII (14,21) SNALUXS CICS21