SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-65
INFO Command
Remote LU Object—XLF Acquired LU
The following example illustrates the INFO LU command with the DETAIL option, and
its returned display for an acquired remote LU.
Command Example:
->INFO LU $APN1.#ITIA03A, DETAIL
Returned Display:
Display Descriptions:
The name given at the end of the first line of the display is the name of the LU object.
The following display fields are not configurable using the ADD LU or ALTER LU
command and are provided for information only:
Local
specifies YES to identify the LU as a local LU.
NT21LU
specifies YES to identify the LU as a type 2.1 LU.
The following display fields do not apply to acquired remote LU objects: ApplFile,
Creator, and DluName. Screen applies only when the protocol is ITI.
All other INFO LU, DETAIL display fields do apply and are described in Section 14,
Attributes for SNAX/XF and SNAX/APN.
SNAX Detailed Info LU \SNACOM1.$APN1.#ITIA03A
*ApplFile........ N/A
*BindEntry....... BIND2 *BindTable........ BINDTAB
*CDI............. NORMAL *Characterset..... EBCDIC
Creator......... N/A Dbcs............. N/A
*DevType......... 3278-2
*DluName......... N/A
Local........... NO *LocalSnaName..... TL17C103
*MaxReadCnt...... 256 *NonSNACA......... NO
NT21............ YES *Protocol......... ITI
PuName.......... #PUC1 *Queue............ OFF
*RecSize......... 4096 *Register......... NO
*Rsptype......... DR *RsptypeWR........ WRER
*Screen.......... NOSCROLL *Screensize....... N/A
*SnaName......... L327004E *SnaNetid......... N/A
*Tlogmgr......... N/A *TPF.............. HIGH
*Type............ (14,2) *SendUnbind01..... N/A