SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-67
INFO Command
Command Example:
->INFO PU $S1.#P0
Returned Display:
Display Descriptions:
PU
indicates the name of the PU.
MaxPTS
has no meaning when SNAX/APN runs on a line.
All other INFO PU display fields are described in Section 14, Attributes for SNAX/XF
and SNAX/APN.
Detailed INFO PU Example for SNAX/XF
The following example illustrates the INFO PU command with the DETAIL option, and
its returned display.
Command Example:
->INFO PU $TRP1.#PU01, DETAIL
Returned Display:
Display Descriptions:
PU *Address *MaxLUs *Type *RecSize *Window *MaxPTS
\SYS2.$S1.#P0 193 125 (13,2) 256 7 N/A
SNAX Detailed Info PU \CHIP.$TRP1.#PU01
*ActPU............ COLD *Address......... %HC12
*AssociateSubDev.. \CHIP.$TOK1.PU01
*AutoLogon........ N/A *BindEntry........ N/A
*BindTable........ N/A *CallAddr......... N/A
*CallValidate..... NONE *ConnId........... N/A
*EssTable......... N/A *L3Retry.......... 65535
*L3Timeout........ 0:00:10.000 *MaxLUs........... 8
*MaxPTS........... 8 *NoAcq............ OFF
*PuidBlk.......... %H070 *PuidNum.......... %H0000001
*RecSize.......... 265 *ReqDisContType... IMMEDIATE
*Reqms............ N/A *ServiceCount..... N/A
SwPUType......... N/A *LnMaxIn.......... 1
*LnMaxOut......... 2 *LnMaxOutIncr..... 1
*LnMaxRetry....... 8 *LnRmtAddr........ 04400011760200
*LnSsap........... $H04 *LnT1............. 0:00:01.000
*LnT2............. 0:00:00.100 *LnTI............. 0:00:30.000
*Type............. (13,2) Window........... N/A