SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-68
INFO Command
The name given at the end of the first line of the display is the name of the PU object.
The following display field is not configurable with the ADD PU or ALTER PU command
and is provided for information only:
SwPuType
indicates whether or not a switched PU is a floating device. ON means that the
switched PU was defined as floating. OFF means that the switched PU was not
defined as floating.
All other INFO PU, DETAIL display fields are described in Section 14, Attributes for
SNAX/XF and SNAX/APN.
Considerations for SNAX/XF—PU Object Type

In both non-detailed and detailed INFO PU displays the Window attribute always
shows the configured value; for details about the use of this attribute for 58,5 lines,
see the description of WINDOW in Section 14, Attributes for SNAX/XF and
SNAX/APN.

The INFO PU display shows only BINDENTRY and BINDTABLE values that were
explicitly specified in an ADD PU or ALTER PU command.
Local PU Object
For the local PU on the NonStop system, the following example illustrates the INFO PU
command with the DETAIL option, and its returned display.
Command Example:
->INFO PU $APN1.#ZNT21, DETAIL
Returned Display:
Display Descriptions:
The name given at the end of the first line of the display is the name of the PU object.
The Address display field does not apply to the local PU object.
The following standard PU attributes are not included in the display, but also apply to
the local PU: L3RETRY, L3TIMEOUT, RECSIZE, SERVICECOUNT, and WINDOW. In
the case of the local PU, these attributes receive default values. These and all other
SNAX Detailed Info PU \SNA2.$APN1.#ZNT21
Address........ N/A CPName........... T16CP1
Dynamic........ OFF MaxLUs........... 20
PUidBlk........ %H000 PUidNum.......... %H0000000
SnaNetId....... USPALO01 *TG.............. 0
*NEGOTIATED TG.. 0 *TGBYTECOST...... 0
*TGCAPACITY..... MIN *TGCONNCOST...... 0
*TGDELAY........ MIN *TGSECURITY...... N/A
*TGUSER1........ 0 *TGUSER2......... 0
*TGUSER3........ 0 Type............ (13,22)