SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-69
INFO Command
INFO PU, DETAIL display fields for the local PU are described in Section 14, Attributes
for SNAX/XF and SNAX/APN. The value of MaxLUs should equal the MaxLocalLUs
specification for the LINE object.
Remote PU Object
For remote PUs, the following example illustrates the INFO PU command with the
DETAIL option, and its returned display.
Command Example:
->INFO PU $APN1.#PUSCFNT, DETAIL
Returned Display:
Display Descriptions:
The name given at the end of the first line of the display is the name of the PU object.
The following display fields do not apply to SNAX/APN remote PUs: CallAddr,
CallValidate, and ConnId.
All other INFO PU, DETAIL display fields for remote PUs are described in Section 14,
Attributes for SNAX/XF and SNAX/APN.
INFO SUBSYS Example
The following example illustrates the INFO SUBSYS command without the DETAIL
option, and its returned display.
Command Example:
->INFO SUBSYS $SSCP
SNAX Detailed Info PU \SNA2.$APN1.#PUSCFNT
*Address........ %H00C7 *AssociateSubDev.. N/A
*CallAddr....... N/A *CallValidate..... NONE
*ConnId......... N/A *CPName...........
*Dynamic........ ON *L3Retry.......... 65535
*L3Timeout...... 0:00:10.000 *MaxLUs........... 6
*NNServer....... NONE *PUidBlk.......... %HFFF
*PUidNum........ %H00FFFFF *RecSize.......... 521
*ServiceCount... 1 *SnaNetId......... USPALO01
*TG............. 0 NEGOTIATED TG.... 0
*TGBYTECOST..... 0 *TGCAPACITY....... DEFAULT
*TGCONNCOST..... 0 *TGDELAY.......... LAN
*TGSECURITY..... NONE *TGUSER1.......... 128
*TGUSER2........ 128 *TGUSER3.......... 128
*LnMaxIn........ N/A *LnMaxOut......... N/A
*LnMaxOutIncr... N/A *LnMaxRetry....... N/A
*LnRmtAddr...... N/A *LnSsap........... N/A
*LnT1........... N/A *LnT2............. N/A
*LnTI........... N/A Type............. (13,21)
*Window......... 7