SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-70
INFO Command
Returned Display:
Display Descriptions:
Name
is the name of the SUBSYS object being reported.
SscpId
does not apply to SNAX/APN operation. When SNAX/APN type 2.1 PUs share the
line with SNAX/XF type 2.0 PUs, this field can contain a value significant to
SNAX/XF operation.
All other INFO SUBSYS display fields are described in Section 14, Attributes for
SNAX/XF and SNAX/APN.
Detailed INFO SUBSYS Example
The following illustrates the INFO SUBSYS command with the DETAIL option, and its
returned display.
Command Example:
->INFO SUBSYS $SSCP, DETAIL
Returned Display:
The name given at the end of the first line of the display is the name of the SUBSYS
object.
SscpId
does not apply to SNAX/APN operation. When SNAX/APN type 2.1 PUs share the
line with SNAX/XF type 2.0 PUs, this field can contain a value significant to
SNAX/XF operation.
The following display field is not configurable with the ALTER SUBSYS or INFO
SUBSYS command and is provided for information only:
SNAX Info SUBSYS:
Name SscpId Xpages Settab
$SSCP 1 32 $System.system.settab
SNAX Detailed Info Subsys \SNA2.$SSCP
*CpName........... SNACOM1 *NodeType......... NONE
*RecvLocate....... NO
*SetTab........... N/A
*SnaNetId......... USPALO1 *SscpId........... 0
Version.......... T9064G05^24APR2000^R80_V009^AJI
*XPages........... 4096