SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-71
INFO Command
Version
is the version of the line-handler process. If there is a mismatch between the line-
handler process and the service manager either in the SPR or RVU versions or
when using multiple service managers, an error message is returned. For more
information, see Appendix C, Error Messages, or the SNAX/XF and SNAX/APN
Event Management Programming Manual.
The CPName and SNANetId display fields do not apply to SNAX/XF. When SNAX/XF
PUs share a line with SNAX/APN PUs, these fields contain values significant to
SNAX/APN operation.
All other INFO SUBSYS, DETAIL display fields are described in Section 14, Attributes
for SNAX/XF and SNAX/APN.
INFO SUBSYS Example With SUB Option
The following example illustrates the INFO SUBSYS command with the SUB option
and its returned display. This example shows a SUBSYS object with one subordinate
LINE object, two subordinate PU objects, and five subordinate LU objects.
Command Example:
->INFO SUBSYS $SSCP, SUB ALL
Returned Display:
Display Descriptions:
SNAX Info Subsys
SUBSYS *SSCPID *XPages *SetTab
\SNACOM1.$SSCP 0 2000 $System.system.settab
SNAX Info APPL
APPL *ApplFile *Creator
\SNACOM1.$SSCP.#CREATE N/A N/A
SNAX Info Line
Line *Station *Switched *Duplex *Retries *Timeout
\SNACOM1.$APN1 PRIMARY OFF FULL 3 0:00:05.000
SNAX Info PU
PU *Address *MaxLus *Type *RecSize *Window *MaxPTS
\SNACOM1.$APN1.#ZNT21 N/A 20 (13,22) 0 0 N/A
\SNACOM1.$APN1.#PU1 %HC8 6 (13,21) 256 7 N/A
SNAX Info Lu
LU *Address PUName *Charset *Type *Protocol *SnaName
\SNACOM1.$APN1.#LLU1 1 #ZNT21 ASCII (14,21) SNALUXS TL17C102
\SNACOM1.$APN1.#RLU1 2 #PU1 ASCII (14,21) SNALUXS CICS21
\SNACOM1.$APN1.#T16APP1 1 #ZNT21 ASCII (14,21) LOGON TL17C101
\SNACOM1.$APN1.#ILM 1 #PU1 ASCII (14,21) N/A ILM
\SNACOM1.$APN1.#ZR00001 2 #PU1 ASCII (14,2) ITI L327004F