SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-76
NAMES Command
NAMES LU, SUB ALL Example
The NAMES LU, SUB ALL and NAMES LU, SUB SESSION commands can display
the multiple and parallel sessions subordinate to a given LU.
Command Example:
->NAMES LU $APN10.#LU1, SUB ALL
Returned Display:
Display Description:
A list of all sessions subordinate to the named LU is displayed. Each session name
takes the form of a 16-digit fully qualified procedure correlation identifier (FQPCID) in
hexadecimal notation. A display of session FQPCIDs similar to the one shown above
would also result from issuing the following command:
NAMES LU $APN10.#LU1, SUB SESSION
Other Examples
Other command examples that might be used for the NAMES command follow:
->NAMES APPL $APN1.#CREATE
->NAMES LINE $APN2
->NAMES LINE $APN3,SUB LU
->NAMES LINE $APN5,SUB ONLY
->NAMES LINE ($APN6,$APN7),SUB PU
->NAMES LU $APN1.#LU1
->NAMES PU $APN1.#PU1
->NAMES PU $APN1.#PU3,SUB ONLY
->NAMES SUBSYS $SSCP,SUB LINE
->NAMES SUBSYS $SSCP,SUB PU
SNAX Names LU \SNAX.$APN10.LU1
LU
$APN10.#LU1
SESSION
$APN10.#LU1.D95F195317EA70FE
$APN10.#LU1.D95F195317EA70FF
$APN10.#LU1.D95F195317EA7100
$APN10.#LU1.D95F195317EA7101