SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-86
STATS Command
I-FRM Sent
indicates the number of DLC I-frames successfully transmitted.
I-FRM Recv
indicates the number of DLC I-frames successfully received.
PIUs Sent
indicates the number of PIUs successfully sent from this line.
PIUs Recv
indicates the number of PIUs successfully received by this line.
REJ Sent
indicates the number of DLC Rejects (REJ) sent by this line.
REJ Recv
indicates the number of DLC Rejects (REJ) received by this line.
RNR Sent
indicates the number of DLC Receiver Not Ready (RNR) commands or responses
sent by this line.
RNR Recv
indicates the number of DLC Receiver Not Ready (RNR) commands or responses
received by this line.
TEST Sent
indicates the number of DLC test frames containing a valid Frame Check
Sequence (FCS) that were received by this line and for which a valid test response
was sent.
TEST Recv
indicates the number of DLC test frames received by this line, with or without a
valid FCS.
PUs Active
indicates the number of currently active PUs under the control of this particular
line.
PUs Defined
indicates the number of PUs that have been defined with the ADD command that
are under the control of the specified line.