SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-88
STATS Command
Note that the WRITE retries counter produced using the STATS LINE command is
not the same as the retries value created using the Measure LINE command.
(Measure and SCF use entirely different methods of counter allocation.) The value
returned by the STATS command is maintained by the SNAX/XF and SNAX/APN
process and is not constrained by any global definition imposed by Measure. The
Measure number is the sum of all retries at the point at which the processor
communicates with the channel, and includes WRITE retries and READ retries
induced by both the SNAX/XF and SNAX/APN process and the hardware (such as
channel errors).
Write Timeouts
indicates the number of timeouts that occurred during WRITE operations for this
line. The timeouts were possibly caused by a clock failure.
Pool LOCAL, Curr High
the number of doublewords of storage currently allocated in the local pool for this
line.
Pool LOCAL, Max High
indicates the maximum number of doublewords of local pool storage ever allocated
for this line.
Pool EXTENDED, Curr High
indicates the number of doublewords of extended segment storage currently
allocated for this line.
Pool EXTENDED, Max High
indicates the maximum number of doublewords of extended segment storage ever
allocated for this line.
STATS LU Example
The following example illustrates the STATS LU command and its returned display. The
SUB option is not valid for the LU object type.
Command Example:
->STATS LU $SNA1.#P1L3
Returned Display:
Display Descriptions:
SNAX Stats LU \SYS1.$SNA1.#P1L3
Sample Time: 08 Mar 2000, 7:59:19.840
Opens : 3