SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-89
STATS Command
Sample Time
indicates the date and time the statistics counters were sampled.
Opens
indicates the number of OPENs currently outstanding for the specified LU.
STATS PU Example
The following example illustrates the STATS PU command and its returned display.
Command Example:
->STATS PU $SNA1.#PU1
Returned Display:
Display Descriptions:
Sample Time
indicates the date and time the statistics counters were sampled.
Reset Time
indicates the time that the statistics counters were last reset.
DM Sent
indicates the number of data link control (DLC) Disconnect Mode (DM) responses
that have been sent from the PU.
DM Recv
indicates the number of DLC Disconnect Mode (DM) responses that have been
received by this PU.
SNAX Stats PU \SYS5.$SNA1.#PU1
Sample Time: 09 Mar 2000, 12:17:28.344
Reset Time: 09 Mar 2000, 06:10:03.007
DM FRMR I-FRM PIUs REJ RNR TEST
-----------------------FRAMES----------------------
Sent 0 0 20667 20667 0 5 0
Recv 0 0 51462 51453 0 0 0
LUs LU to LU sessions
---------- -----------------
Active 32 14
Defined 32
Bad DCE Frame Frames PIUs Station Negative
PIUs Check Discarded Discarded Aborts Response
----------------------ERRORS-------------------------------
0 0 0 0 0 0 5705