SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-90
STATS Command
FRMR Sent
indicates the number of DLC Frame Rejects (FRMR) sent because of an N(R)
SEQ error (data without a command) or an invalid command.
FRMR Recv
indicates the number of DLC Frame Rejects (FRMR) received.
I-FRM Sent
indicates the number of DLC I-frames successfully transmitted.
I-FRM Recv
indicates the number of DLC I-frames successfully received.
PIUs Sent
indicates the number of PIUs successfully sent from this PU.
PIUs Recv
indicates the number of PIUs successfully received by this PU.
REJ Sent
indicates the number of DLC Rejects (REJ) sent by this PU.
REJ Recv
indicates the number of DLC Rejects (REJ) received by this PU.
RNR Sent
indicates the number of DLC Receiver Not Ready (RNR) commands or responses
sent by this PU.
RNR Recv
indicates the number of DLC Receiver Not Ready (RNR) commands or responses
received by this PU.
TEST Sent
indicates the number of DLC test frames containing a valid Frame Check
Sequence (FCS) that were received by this PU and for which a valid test response
was sent.
TEST Recv
indicates the number of DLC test frames received by this PU, with or without a
valid FCS.