SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-91
STATS Command
LUs Active
indicates the number of currently active LUs under the control of this particular PU.
LUs Defined
indicates the number of LUs that have been defined with the ADD command that
are under the control of the specified PU.
Bad PIUs
indicates the number of bad path information units (PIUs) received by this PU.
DCE
indicates the number of DCE interrupts or other unexpected errors, such as DTR
or CTS dropping, that have occurred for this PU.
Frame Check
indicates the number of DLC frames received for this PU that contained FCS
errors.
Frames Discarded
indicates the number of frames received for PUs that have not been added to the
line or for frames received that were too long (exceeded SCF DEVICE
FRAMESIZE or SCF LINE RECSIZE specification for the line).
PIUs Discarded
indicates the number of PIUs discarded by this PU.
Station Aborts
indicates the primary station abort count.
Negative Response
indicates the number of SNA negative responses received for requests originating
at the specified PU.
LU to LU sessions
indicates the number of LU-LU sessions currently active for this PU.
STATS SUBSYS Example
The following example illustrates the STATS SUBSYS command and its returned
display.
Command Example:
->STATS SUBSYS $SSCP