SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-96
STATUS Command
Examples
Example STATUS displays for each object type are shown on the following pages. If an
information item in the display does not apply to the specified object, N/A is displayed
in place of the value.
STATUS APPL Example
The following example illustrates the STATUS APPL command and its returned display.
Table 13-3. STATUS Command Information Items
Object Type Items Items (continued)
APPL STATE
LINE ALTERNATE IP LINESTATE
BKPTRACE PATH
CMAPPL PREFERRED ID
DESIREDSTATE PRITRACE
INUSE STATE
I/O ADDRESS TRACE
LU BKPTRACE SESSID
DESIREDSTATE SESSIONCOUNTMAX
LUSESSION STATE
LUSTATE SWLINENAME
OPENS SWSTATE
PRITRACE
PU BKPTRACE STATE
DESIREDSTATE SWLINE
PRITRACE SWSTATE
PUSTATE TEST
SESSION None specifiable
SUBSYS BKPTRACE STATE
PRITRACE