SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-98
STATUS Command
LineState
indicates internal state information about this line. The following are valid values
that may appear under the LineState heading:
ABCONRSPPD
indicates that the line is waiting for a response to an ABORT CONNECTION
request.
ACTIVE
indicates that the line is ready to handle end-user data flows.
ACTLRSPPD
indicates that the line is waiting for a response to an SNA ACTLINK request.
ALKRSPPD
indicates that the line is waiting for a response to an SNA ADDLINK request.
DACTLRSPPD
indicates that the line is waiting for a response to an SNA DACTLINK request.
DIAGACTIVE
indicates that the line is in diagnostics mode, that is, diagnostic functions are
currently active.
INACTIVE
indicates that the line has been added but is in a quiesced state.
MLKRSPPD
indicates that the line is waiting for a response to an SNA MODLINK request.
NOTADDED
indicates that the line has not yet been added with the ADD command.
Detailed STATUS LINE Example
The following example illustrates the STATUS LINE command with the DETAIL option,
and its returned display for line type 58,5.
Command Example:
->STATUS LINE $SNXP1, DETAIL