SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-99
STATUS Command
Returned Display:
Display Descriptions:
Inuse
indicates whether this line is presently in passthrough mode. An ON indicates that
either this line is in passthrough mode or that this line has at least one subordinate
LU open.
DesiredState
provides a mechanism to notify the service manager when an operator issues a
START, ABORT, or STOP command for a line, PU, or LU.
NONE
indicates that no commands have been issued for the line.
ACTIVE
indicates that a START command has been issued for the line.
INACTIVE (Abort)
indicates that an ABORT command has been issued for the line.
INACTIVE (Stop)
indicates that a STOP command has been issued for the line.
LineState
indicates internal state information about this line. The following are valid values
that may appear under the LineState heading:
ABCONRSPPD
indicates that the line is waiting for a response to an ABORT CONNECTION
request.
ACTIVE
indicates that the line is ready to handle end-user data flows.
SNAX Detailed Status LINE \SYS2.$SNXP1
Inuse.......... OFF DesiredState... Active
LineState...... ACTLRSPPD Path........... A
I/O Addr....... 4,0, %3, %0 Track ID....... ABCDE
Preferred IP... 122.97.98.99 Alternate IP... 65.65.65.65
CMAPPL......... N/A PriTrace....... INACTIVE
BkpTrace....... INACTIVE State.......... STARTING
PriTraceFile... N/A
BkpTraceFile... N/A