SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-101
STATUS Command
Alternate IP
indicates the alternate IP address used by the process. This attribute is not
applicable to X.25 lines (type 58,3).
CMAPPL
does not apply to SNAX/APN.
PriTrace
indicates the current state of trace activity for this line (primary). Possible values
are ACTIVE and INACTIVE.
BkpTrace
indicates the current state of trace activity for this line (backup). Possible values
are ACTIVE and INACTIVE.
State
indicates the current state of the LINE object. For a description of the valid object
states for LINE objects, see Section 12, Objects for SNAX/XF and SNAX/APN.
PriTraceFile
is the name of the trace file if tracing is active for the primary line-handler process,
or N/A if tracing is inactive for the primary.
BkpTraceFile
is the name of the trace file if tracing is active for the backup line-handler process,
or N/A if tracing is inactive for the backup.