SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-102
STATUS Command
STATUS LINE, SUB ALL Example
The following example shows the STATUS LINE command with the SUB ALL option
and its returned display for a line using SNAX/APN.
Command Example:
->STATUS LINE $APN1, SUB ALL
Returned Display:
Display Descriptions:
Name
indicates the name of the LINE object being reported.
State
indicates the current state of this LINE object. For a description of the valid object
states, see Section 12, Objects for SNAX/XF and SNAX/APN
.
Inuse
indicates whether this line has at least one subordinate LU in session.
SNAX Status LINE
Name State Inuse LineState
\SYS1.$APN1 STARTED ON ACTIVE
SNAX Status PU
Name State Test PUState
\SYS1.$APN1.#ZNT21 STARTED INACTIVE ACTIVE
\SYS1.$APN1.#PU1 STARTED INACTIVE ACTIVE
SNAX Status LU
Name State LUSessState SDN SessionCount
\SYS1.$APN1.#LLU1 STARTED ACTIVE 2 5
\SYS1.$APN1.#RLU1 STARTED ACTIVE 0 5
SNAX Status Session
FQPCID LU Name PTNR-SNANAME Primary Trace
D95F1953 17EA70FE $SYS1.$APN1.#LLU1 AS4APP1 PRI INACTIVE
D95F1953 17EA70FF $SYS1.$APN1.#LLU1 AS4APP1 PRI INACTIVE
D95F1953 17EA7100 $SYS1.$APN1.#LLU1 AS4APP1 PRI INACTIVE
D95F1953 17EA7101 $SYS1.$APN1.#LLU1 AS4APP1 PRI INACTIVE
D95F1953 17EA7102 $SYS1.$APN1.#LLU1 AS4APP1 PRI INACTIVE
D95F1953 17EA70FE $SYS1.$APN1.#RLU1 TAPPL1 SEC INACTIVE
D95F1953 17EA70FF $SYS1.$APN1.#RLU1 TAPPL1 SEC INACTIVE
D95F1953 17EA7100 $SYS1.$APN1.#RLU1 TAPPL1 SEC INACTIVE
D95F1953 17EA7101 $SYS1.$APN1.#RLU1 TAPPL1 SEC INACTIVE
D95F1953 17EA7102 $SYS1.$APN1.#RLU1 TAPPL1 SEC INACTIVE