SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-104
STATUS Command
NO SESS
indicates that no session is currently active on this LU.
STOPPING
indicates that the LU-LU session is being stopped.
SUSPENDED
indicates that opens have been stopped and no session is active.
SDN
is the subdevice number of the LU.
SessionCount
is the number of sessions in which this LU is engaged.
Detailed STATUS LU Example
The following example illustrates the STATUS LU command with the DETAIL option,
and its returned display.
Command Example:
->STATUS LU $SNA1.#LU1, DETAIL
Returned Display:
Display Descriptions:
DesiredState
provides a mechanism to notify the service manager when an operator issues a
START, ABORT, or STOP command for a line, PU, or LU.
NONE
indicates that no commands have been issued for the LU.
ACTIVE
indicates that a START command has been issued for the LU.
SNAX Detailed Status LU \SYS1.$SNA1.#LU1
DesiredState.... Inactive(Abort) LUSessState...... NO SESS
LUState......... ACTIVE Opens............ ALLOWED
SessionCount.... 20 SessionCountMax.. 35
SDN............. 1 State............ STARTED
SwLineName...... $SNA1 SwState.......... ON
PriTrace........ INACTIVE BkpTrace......... INACTIVE