SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-105
STATUS Command
INACTIVE (Abort)
indicates that an ABORT command has been issued for the LU.
INACTIVE (Stop)
indicates that a STOP command has been issued for the LU.
LUSessState
indicates the current state of the LU-LU session associated with this LU. The
following are valid values that may appear under the LUSessState heading:
ACT & SUSP
indicates that a non-passthrough (that is, a NonStop application) session is
active, but that further opens have been stopped.
ACTIVE
indicates that a non-passthrough session is active and opens have not been
stopped.
NO SESS
indicates that no session is currently active on this LU.
STOPPING
indicates that the LU-LU session is being stopped.
SUSPENDED
indicates that opens have been stopped and no session is active.
LUState
indicates detailed internal state information pertaining to the specified LU. The
following are valid values that may be returned under the LUState heading:
ACTIVE
indicates that the LU has been defined with the ADD command and has been
initialized. The LU is now ready or is currently in the process of handling end-
user data flows.
ACTLURQPD
indicates that the LU is waiting for an SNA ACTLU request. Note that this state
only applies to LUs on secondary lines.