SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-107
STATUS Command
STOPPED
indicates that OPEN procedure calls are forbidden for the LU; that is, any
OPEN requests sent to this LU are rejected.
SDN
is the subdevice number of the LU.
SessionCount
is the number of sessions in which this LU is engaged.
SessionCountMax
keeps track of the highest number of sessions for a given LU.
SessId
indicates the logical subdevice number of the current LU. Note that for switched
LUs, this value is not provided unless the LU is connected.
State
indicates the current state of this LU object. For a description of the valid object
states for LU objects, see Section 12, Objects for SNAX/XF and SNAX/APN.
SwLineName
indicates the name of the line to which the corresponding LU is connected. This
value is not returned unless the specified switched LU is connected.
SwState
indicates additional state information for switched LUs. The following are valid
values that may appear under the SwState heading. This value has no meaning in
a SNAX/APN environment.
STOPPED
indicates that the switched floating LU has been defined to SNAX/XF and
SNAX/APN but has not been initialized.
STARTED
indicates that the switched floating LU is in the pool and is waiting to be
subordinated.
CONNECTED
indicates that the switched floating LU is subordinate to a line. This implies that
more information pertaining to the status of this object is provided under the
LUSessState and SessId headings.