SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-108
STATUS Command
PriTrace
indicates the current state of trace activity for this LU (primary). Valid values are
ACTIVE and INACTIVE.
BkpTrace
indicates the current state of trace activity for this LU (backup). Valid values are
ACTIVE and INACTIVE.
Detailed STATUS LU, SUB ONLY Example (LU Used for APPC)
The following example illustrates the STATUS LU command with the DETAIL and SUB
ONLY options and shows its returned display. The LU named in the command is
engaged in parallel sessions with another LU. In the display, each session is listed
according to its fully qualified procedure correlation identifier (FQPCID). Under each
FQPCID are listed the configured names of the both LUs engaged in the session. This
sample command specifies a local LU object on the NonStop system. The command
could also be issued with the specification of a remote LU object.
Command Example:
->STATUS LU $APN1.#LLU1, SUB ONLY, DETAIL