SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-110
STATUS Command
Display Descriptions:
D95F1953 17EA70FE, D95F1953 17EA70FF, D95F1953 17EA7100, and
D95F1953 17EA7101
are FQPCIDs that identify sessions.
TPF
indicates the transmission priority field (TPF) for the specified session. The
following values can appear under the TPF heading:
LOW
specifies that this session has low priority relative to other sessions.
MED
specifies that this session has medium priority relative to other sessions.
HI
specifies that this session has high priority relative to other sessions.
LU
presents information about the LU object specified in the STATUS command.
Name
is the fully qualified name of the LU.
SNAName
is the SNA name of the LU.
SNANetid
is the SNA network identifier of the node in which this LU is located.
Primary
indicates whether the LU is primary or secondary in this session.
PriTrace
indicates the current state of trace activity for this LU (primary). Valid values
are ACTIVE and INACTIVE.
Partner-LU
presents information about the LU which is engaged in this session with the LU
specified in the STATUS command.