SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-116
STATUS Command
MLKSTARSPPD
indicates that the PU is waiting for a response to an SNA MODLINK STATION
request.
RQDISCRSPPD
indicates that the PU is waiting for an SNA REQUEST DISCONTACT request.
Note that this state applies only to PUs on secondary lines.
State
indicates the current state of the PU object. For a description of the valid object
states for PU objects, see Section 12, Objects for SNAX/XF and SNAX/APN.
SwLine
indicates the name of the line to which the corresponding PU is connected.
SwState
indicates additional state information for switched PUs. The following are valid
values that may appear under the SwState heading:
CONNECTED
indicates that the PU is subordinated to a line. This implies that more
information pertaining to the status of this object is provided under the PUState
heading.
STARTED
indicates that the switched floating PU is in the pool and is ready for
subordination. Currently, no connections have been made.
STOPPED
indicates that the switched floating PU has been defined to SNAX/XF and
SNAX/APN but has not been initialized.
Test
indicates whether diagnostic testing of the specified PU object is currently in
progress. For switched floating PUs, this attribute is not returned unless the given
PU is connected. No diagnostic testing is currently supported for PUs under any
line type, so this field always displays INACTIVE.
PriTrace
indicates the current state of trace activity for this PU (primary). Valid values are
ACTIVE and INACTIVE.