SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-119
STATUS Command
Command Example:
->STATUS SESSION $APN1.#LLU1.E79F201700861167, DETAIL
Returned Display:
Display Descriptions:
E79F2017 00861167
is the fully qualified procedure correlation identifier (FQPCID) of the session.
TPF
indicates the transmission priority field (TPF) for the specified session. The
following values can appear under the TPF heading:
LOW
specifies that this session has low priority relative to other sessions.
MED
specifies that this session has medium priority relative to other sessions.
HI
specifies that this session has high priority relative to other sessions.
LU
presents information about a local LU or remote LU engaged in the session.
Name
is the fully qualified name of the LU.
SNAName
is the SNA name of the LU.
SNAX Detailed Status Session E79F2017 00861167
TPF.............MED
LU :
Name........... \SYS1.$APN1.#LLU1
SNAName........ TAPPL1 SNANetid..... USPALO01
Primary........ PRI
PriTrace....... INACTIVE
Partner-LU :
Name........... $APN1.#RLU1
SNAName........ AS4APPL1 SNANetid..... USPALO01