SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-120
STATUS Command
SNANetid
is the SNA network identifier of the node in which the LU is located.
Primary
indicates whether the LU is primary or secondary in this session.
PriTrace
indicates the current state of trace activity for this LU (primary). Valid values
are ACTIVE and INACTIVE.
Partner-LU
presents information about the LU that is engaged in this session with the LU
specified in the LU fields.
Name
is the configured subdevice name of the LU and the name of the line to which it
is subordinate.
SNAName
is the SNA name of the LU.
SNANetid
is the SNA network identifier of the node in which this LU is located.
Detailed STATUS SESSION Example (Acquired Remote LU)
The following example shows the STATUS SESSION command with the DETAIL
option, and its returned display for an acquired remote LU.
Command Example:
->STATUS SESSION $APN1.#ITI01.E79F201700861167, DETAIL
Returned Display:
SNAX Detailed Status Session E79F2017 0C71650E
TPF............ HI
LU :
Name........... \SNADEV4.$APN1.#ITI01
SNAName........ L327004E SNANetid..... USPALO01
Primary........ PRI
PriTrace....... ACTIVE
LocalSNAName... TL17C103