SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-121
STATUS Command
Display Descriptions:
E79F2017 0C71650E
is the fully qualified procedure correlation identifier (FQPCID) of the session.
TPF
indicates the transmission priority field (TPF) for the specified session. The
following values can appear under the TPF heading:
LOW
specifies that this session has low priority relative to other sessions.
MED
specifies that this session has medium priority relative to other sessions.
HI
specifies that this session has high priority relative to other sessions.
LU
presents information about a local LU or remote LU engaged in the session.
Name
is the fully qualified name of the LU.
SNAName
is the SNA name of the LU.
SNANetid
is the SNA network identifier of the node in which the LU is located.
Primary
indicates whether the LU is primary or secondary in this session.
PriTrace
indicates the current state of trace activity for this LU (primary). Valid values
are ACTIVE and INACTIVE.
LocalSNAName
is the name configured in the LOCALSNANAME attribute (described in
Section 14, Attributes for SNAX/XF and SNAX/APN
) for this acquired remote
LU.