SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-122
STATUS Command
STATUS SUBSYS Example
The following example illustrates the STATUS SUBSYS command without the DETAIL
option, and its returned display.
Command Example:
->STATUS SUBSYS $SSCP
Returned Display:
Display Descriptions:
Name
is the name of the SUBSYS object being reported.
State
indicates the current state of the SUBSYS object. For a description of the valid
object states for the SUBSYS object, see Section 12, Objects for SNAX/XF and
SNAX/APN.
PriTrace
indicates the current state of primary trace activity for this subsystem. Valid values
are ACTIVE and INACTIVE.
BkpTrace
indicates the current state of backup trace activity for this subsystem. Valid values
are ACTIVE and INACTIVE.
Detailed STATUS SUBSYS Example
The following example illustrates the STATUS SUBSYS command with the DETAIL
option, and its returned display.
Command Example:
->STATUS SUBSYS $SSCP, DETAIL
SNAX Status SUBSYS
Name State PriTrace BkpTrace
\SYS3.$SSCP STARTED INACTIVE INACTIVE