SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-136
TRACE Command
X.25 Lines (Device Type 58,3)
For X.25 lines, the select-spec is one or more of the following keywords:
L2DATA (number = 2)
specifies tracing of I/O from level 2 to X25AM. This information can be traced
selectively by also specifying PUSELECT.
PIU (number = 3)
specifies tracing of level-3 Path Information Unit (PIU) I/O. This information can be
traced selectively by also specifying PUSELECT.
BIU (number = 4)
specifies tracing of level-4 Basic Information Unit (BIU) I/O. This information can be
traced selectively by also specifying LUSELECT.
FILESYS (number = 6)
specifies tracing for level-6 file-system requests and responses.
MSGSYS (number = 8)
specifies tracing for level-4 and SNAX/XF and SNAX/APN I/O subsystem (IOS)
message-system traffic.
keyword
L2DATA (1)
PIU (1)
BIU (2)
FILESYS
MSGSYS
LVL2 (1)
LVL3 (3)
LVL4 (4)
LVL5 (4)
LVL6 (4)
ASM (1)
BM
LINESTD
ALL
(1) Can be traced selectively by using PUSELECT.
(2) Can be traced selectively by using LUSELECT.
(3) The state machine can be traced selectively by using PUSELECT.
(4) The state machine can be traced selectively by using LUSELECT.